Can I Manually Open My Gate After Installing A Viking Swing Gate Opener?
If your Viking gate operator needs to be opened manually, there are easy ways to open and close your operator without using the automatic options. However, this should only be used when necessary due to a power outage or other circumstances. Usually, this can be done from the control board or the manual release of all gate operators.
How to Manually Open A Swing Gate
There are two methods of manually opening your gate. The first is through a simple manual release.
To complete a manual release:
- Remove the cover of the operator or hat.
- Lift the locking handle.
- Take off the clutch key.
- To reengage your operator, align the clutch and output shaft, then insert the clutch key.
- Always push down the locking handle and reattach the hat when you are done.
This is the easiest way to manually operate a Viking gate operator.
How Do You Manually Open A Viking Slide Gate Operator?
With a Viking sliding gate operator, there are two ways to open it manually. One is the easiest and less complicated, and the other requires finding wiring and the control board on your operator.
To complete a manual release on a slide gate operator:
- Remove the cover of your operator.
- Press the manual release switch and change it to the "release" position.
Manually Operating Your Automatic Gate Using An Alternate Method
To manually open your gate, find the force needed to move your gate. After all, since you will be moving your gate manually, you must ensure you can. After determining this, you must enter fail-safe mode.
To Enter Fail Safe Mode:
Remove the wire jumper from the select "Fail/Secure" connector.
After this, the gate can be moved easily with not as much force.
How To Take Your Gate Out Of Manual Open Mode
You'll need to place your gate operator in fail-secure mode to take your gate out of this manual mode.
To Enter Fail Secure Mode:
Insert the wire jumper plug in the "Fail Safe/Secure" connector. Then, your gate will not be able to move manually.
Can You Operate A Viking Gate Operator Manually All The Time?
While this is possible with the manual release, this is not encouraged. After all, purchasing an automatic gate opener means you will not always have to open and close your gate manually. If your gate is malfunctioning, refer to the manual that came with your gate operator or consult an installer.