Viking G-5 Versus Viking E-4 Gate Opener
If you own a swing gate, you know the importance of having the correct operator to help your gate function its best. Viking Access Systems makes quality swing gate operators that allow continuous operation and have high power efficiency. However, two models that look the same but have some different features are the G-5 and E-4 swing gate operators. If you need help deciding which one to purchase, this is a quick cheat sheet on all the available features and differences.
G-5 Swing Gate Operator
The G-5 operator is a linear actuator like the E-4. However, one key difference is that the maximum gate weight this operator can handle is 2,000 pounds. Using this linear actuator for a very heavy gate is a better option anywhere that requires an industrial-strength gate operator. Along with handling gate weight well, the G-5 has a handy electronic manual release switch and comes pre-wired. A V-Flex control board controls this unit, so you customize the speed of your G-5 swing gate operator.
Additional Features:
- Max Operating Speed Of 15-18 Seconds
- Strike Protection: 10,000 Amps/20,000 Volts
- 100% Duty Cycle Helps Run Operator 24/7
- Operating Temps From -20°F Up To 160°F
E-4 Swing Gate Operator
If you choose this option, the E-4 linear actuator works well too. One key variation is that the max gate weight is 850 pounds for the 10-foot unit and 550 pounds for the 16-foot unit. This means that this actuator is more suited for residential use instead of commercial. Along with this, this unit has a manual release handle, allowing for a fast installation. Use low-voltage wiring to power the E-4, and it is ready to work with your gate.
Additional Features:
- Max Operating Speed Of 12-16 Seconds Per 90°
- Strike Protection: 10,000 Amps/20,000 Volts
- E-4 Control Board Can Work With Single Or Dual Gates
- Operating Temps From -20°F Up To 160°F
Similarities Between The E-4 And G-5 Swing Gate Operator Units
Despite the different features of these units, the E-4 and G-5 have many similarities, as you may see. These units are both linear operators and can handle much weight.
Some other similarities include the following:
- Strike Protection
- Same Operating Temperatures
- A Breakaway Joint Protecting The Primary Gear Drive
- Easily Reparable Onsite
Another great feature is the build of all Viking gate openers. The chassis is created so your opener will handle extreme weather conditions. These linear operators are made to last and will continue even after many years. Plus, all Viking gate operators have a warranty of 3 years, so you can rest assured that your unit is covered if a malfunction occurs.
If you need further help to pick out the right swing gate operator, contact one of our helpful sales representatives.
Contact Us